MPO/MTP Fiber Optic 8,12,24 Core Singlemode Multimode MPO MTP Patch Cord

MPO/MTP to MPO/MTP Patch Cord

MTP/MPO Fiber Optic Patch Cable consists of multi core fiber optic cable and corresponding 4/8/12/24 core high density MPO/MTP connector. The connector might be female or male with guide pin. The fiber support single mode and multimode, the single mode fiber including G652D / G657A1 / G657A2, the multimode fiber including OM1 / OM2 / OM3 / OM4 / OM5, or bending insensitive multimode cable.

Newsun tech with strong MPO/MTP product design and manufacturing ability, we could provide products with tailed to customer requirement. All products we delivered with excellent performance and reliability.

Connector Specifications

MTP/MPO Connector
Fiber Mode	Single Mode	Multimode
Insertion Loss (dB)	≤0.70 (Standard)	≤0.70 (Standard)
	≤0.35 (Elite)	≤0.35 (Elite)
Return Loss (dB)	≥60	≥20
Durability (dB)	≤0.2  (500 times mating)
Tensile Strength (kgf)	10
Working Temperature (℃)	.-20 ~ +70

MTP/MPO Connector Geometry Parameters

Item	X-axis		Y-axis
	Min	Max	Min	Max
Radius of Curvature (mm)	500	-	50	-
Polishing Angle	0-0.2	0+0.2	8-0.2	8+0.2
Fiber Height (nm)	1000 ~ 3000
Max Fiber Height Error (nm)	600
Adjacent Fiber Height Error (nm)	-300 ~ +300
Avg. Fiber Height Error (nm)	-300 ~ +300
Central Concave (nm)	300

Fiber Specification

Fiber Type	Multimode				Single Mode
	OM1	OM2	OM3	OM4	G.652	G.657
Core Diameter (um)	62.5/125	50/125	50/125	50/125	9/125	9/125
Wavelengths (nm)	850/1300	850/1300	850/1300	850/1300	1310/1550	1310/1550
Max. Attenuation (dB/km)	3.5/1.5	3.5/1.5	3.5/1.5	3.5/1.5	0.36/0.25	0.36/0.25
Min. OFL Bandwidth (MHz·km)	200/500	500/500	1500/500	3500/500	-	-
Min. Effective Modal Bandwidth (MHz·km)	-	500	2000	4700	-	-

The effective modal Bandwidth for multimode is for 850nm.

Standard Cable Specifications

Fiber	Outer Diameter (mm)	Weight (kg/km)	Max. Tensile Force (N)		Min. Bending Radius (mm )
Count			Short term	Long term	Short term	Long term
12	3.0 ± 0.15	8	150	80	20D	10D
24	4.2 ± 0.3	31	300	160	20D	10D

   MPO/MTP Fiber Optic Patch Cord               

Customized, high adaptability

Optional different fiber cores and cable structure for different installation requirement

PVC, LSZH, OFNR, OFNP cable jacket available

Improved and simplified cabling, reduce cabling spacing

All patch cable are 100% tested, test report supplied with each cable assembly

Tests  Interferometer, Insertion Loss, Return Loss and Visual Final Inspection; all measured values are electronically archived

Applications

Data Center

Fiber to the home

High density fiber optic cable management

40Gb/s or 100Gb/s  Applications

Standards Compliance

TIA/EIA-568-C 

IEC-61754-7 

NFPA 262 (OFNP) or IEC 60332 (LSZH)

IEC-60793

GR-1435-CORE

MTP (Mechanical Transfer Push-on) connector structure is an improved version of MPO (Multi-fiber push-on) connector. The MTP connector has elliptical guide pins of noncorrosive steel for accurate location of fibers of the two commutating connectors and reduction of wear. Also the MT-ferrule has a floating structure that provides integrity of physical contact of the connectors under load.

Difference between MPO Connector and MTP Connector

From the outside there is very little noticeable difference between MPO and MTP connectors. In fact, they are completely compatible and inter-mateable. For example, an MTP trunk cable can plug into an MPO outlet and vice versa.

The main difference is in relation to its optical and mechanical performance. MTP is a registered trademark and design of US Connec, and provides some advantages over a generic MPO connector. Since MPO / MTP optic fiber alignment is critical to ensure a precise connection there are some benefits in utilizing the MTP connector. The MTP connector is a high performance MPO connector with multiple engineered product enhancements to improve optical and mechanical performance when compared to generic MPO connectors.

The MTP optic fiber connector has floating internal ferrule which allows two mated ferrules to maintain contact while under load. In addition, The MTP connector spring design maximizes ribbon clearance for twelve fiber and multifiber ribbon applications to prevent fiber damage.

Overall it provides a more reliable and precise connection. In addition, it is also important when specifying an MPO/MTP system to ensure the correct polarity options and which cables and outlets have female or male pins.

1 . We offer competitive price for fiber optic patch cables, and etc;

2 . Strict QC system and high quality products;

3 . Low courier international shipping cost;

4 . Custom fiber patch cable for special applications;

5 . Fast delivery for bulk fiber optic cable;

Features & Benefits

• Integrity

Terminations are designed and tested to Guarantee: 0.2 dB insertion loss or less, exceeding industry standards;

Supports industry standard singlemode and multimode connectors;

Singlemode and multimode and hybrid cables available; 

• Protection

Each fiber jumper is individually covered with an outer jacket for added protection;  

Wide variety of jacket sizes for all applications, 3 mm, 2 mm, 1.6 mm, 1.2 mm, 900 μm;

Riser and Plenum rated jacket options available;

Available in simplex, dual-round and dual zip-cord configurations;

• Access

Compact jacket design minimizes cable pile up;

Industry standard terminations include ST, SC, FC, LC;

• Investment

Indoor Fiber Jumper Assemblies offer an economical solution for deploying fiber in any optical network;

Environmentally stable, low-insertion loss, minimal back reflection;

All assemblies are 100% tested;

Certificate of Conformity

Quality Management System

Certification for Sale Transport

ISO 9001

SGS

Patent Certificate