LC/SC/FC/ST Type Variable Fiber Optic VOA In-Line Attenuator
As optical passive devices,Newsun tech attenuators are mainly used in fiber optic to debug optical power performance & optical instrument calibration correction & fiber signal attenuation to ensure the optical power in a stable and desired level in the link without any changes on its original transmission wave.
| Fiber Connector | LC/SC/FC/ST |
| Cable lengths | 2 meters |
| Attenuation | 0~60dB |
| Attenuation Accuracy | ±0.8dB |
| Polarization Dependent Loss | ≤0.2dB |
| Humidity | 95%RH |
| Storage Temp Range | -40~85°C |
| Ferrule Type | Zirconia Ceramic |
| Transfer Mode | Singlemode&Multimode |
| Operating Wavelength(nm) | 1310~1550(SM)/850~1300(MM) |
| Minimize Insertion Loss | <2.5dB |
| Max Optical Input Power | 200mW |
| Operating Temp Range | -40~80°C |
LC Variable In-Line Attenuator FC Variable In-Line Attenuator SC Variable In-Line Attenuator SC/APC Variable In-Line Attenuator
Variable Fiber Optic VOA In-Line Attenuator, SM/MM, 0~60dB
Variable in-line optical attenuators comprises a dual fiber collimator and a reflection component separated by a linear moveable ND filter. They are used to permit dynamic control of optical power levels in a fiber and can be applied to adjust power level of signal in the optical communication at the output of light sources, E/O converters and for the linear or dynamic range of power meter.
| Certificate of Conformity | | Certification for Sale Transport |
| ISO 9001 | SGS | SGS |
© 2019 Ningbo Newsun Optronics Technology Co., Ltd. All Rights Reserved.