PRODUCTS
Home » Products » Fiber Optic Tools » Test and Inspection » NS-KT100 250X Handheld Fiber Optic Inspection Probe Microscope with FT-Display Screen LCD for LC/SC/FC Connectors

Product Category

NS-KT100 250X Handheld Fiber Optic Inspection Probe Microscope with FT-Display Screen LCD for LC/SC/FC Connectors

Product name:250X Handheld Fiber Optic Inspection Probe Microscope
Part NO: NS-KT100
Display Screen:3.5’’ TFT-Display Screen LCD
Optical Magnification:250 times
Availability:
Quantity:
  • NS-KT100
  • Newsun tech

Portable Fiber Optic Inspection Microscope


NS-KT100 is a portable, video microscope used to inspect all kinds of fiber optic terminations, especially for the female ones. It eliminates the need to access the backside of patch panels or disassemble hardware devices prior to inspection.


Magnification 400x (8’’ Monitor)  250x (3.5’’ Monitor)
Resolution Ratio 0.5 um
Display Screen 3.5" TFT-Display Screen LCD
Video Output NTSC / PAL

fiber optic microscop

Handheld Fiber Optic Inspection Probe Microscope with FT-Display Screen LCD


High performance fiber end face inspection probe. A stand-alone video inspection scope, with a high-resolution LCD display that shows fiber endface anomalies in great detail.

Tips Type Function Description
25-U-M FC/SC/ST/E2000  Patch cord UPC connector
125-U-M LC/MU   Patch  cord UPC termination
25-A-M FC/SC/ST/E2000   Patch cord APC connector
125-A-M LC/MU   Patch cord APC termination
25-U-F FC/SC/ST/E2000  UPC bulkhead
125-U-F LC  UPC bulkhead
25-A-F SC APC bulkhead
125-A-F LC APC bulkhead


Handheld Fiber Optic Inspection Probe Microscope

Readily carried with compact size and light weight.

Widely used in DWDM, SDH, SONET Devices and Optical Switch, ODF box, etc.


fiber optic microscope

It is a fact that fiber end-face contamination is a major cause of network outages and downtime. Newsun Tech fiber inspection products enable network technicians and other personnel to safely inspect fiber endfaces for contamination and verify the effectiveness of fiber cleaning procedures.


Newsun Tech offers the best solutions for manufacturing fiber optic cable assemblies. Almost as critical to the equipment used to manufacture fiber optic assemblies are the tools used to test and inspect. At Newsun Tech, we have focus on both the Production and the Field Test and inspection. Newsun Tech works with our customers to make sure their manufacturing procedures produce the highest quality jumpers at the most effective cost.


Newsun Tech focuses on several areas to ensure industry-leading solutions and best practices including: Visual fault locator, fiber optical power meter, Fiber Optic Connector handle test tools Kit, 250X/400X Handheld Fiber Optic Inspection Microscope, and etc..


Production Test and Inspection is generally used in lab type settings where the systems remain stationary. They are built to handle large volumes and typically test to a higher degree of accuracy. This equipment is not only used to provide test reports for customers, but it also allows for the collection of large segments of data that can be reviewed for improvements in the production processes.


Field Test and Inspection pieces of test equipment are designed to be highly portable with internal power supplies and smaller footprints. They are well suited for troubleshooting, mapping and certifying fiber optic networks during and after installation in the field.


We provide the highest quality equipment backed with industry-leading technical support and exceptional customer service. With cutting edge equipment, automation, and process controls.



Critical Areas in the Test STEP

Accurate Test Results: Improper test station setup can and will result in inaccurate testing results. “False Negatives” needlessly increase your rework, while “False Positives” potentially send non-conforming product to your customers.

Multimode Cable Assembly Testing: Proper mode-conditioning is essential to ensure accurate Multimode cable assembly testing.


Test Lead Quality: Essential and often overlooked. Consider your Test Leads to be part of your test equipment, and should be made to the highest quality possible — most importantly, Test Lead connectors should have excellent core-to-ferrule-OD concentricity.




certificate of conformity

Certificate of Conformity


Quality management system certificationQuality Management System


certification for sale transport

Certification for Sale Transport

ISO 9001

ISO 9001


SGS

SGS


Patent certificate

                     Patent Certificate





Previous: 
Next: 
Product Inquiry

Quick Link

© 2019 Ningbo Newsun Optronics Technology Co., Ltd. All Rights Reserved.

Leave a Message
Contact Us