Views: 251 Author: Site Editor Publish Time: 2020-06-30 Origin: Site
Newsun Technology Co., Ltd
Annual output of 300000 sets of communication chassis spray production line project Completion environmental protection announce
According to the relevant provisions of the environmental protection acceptance procedures for the completion of the construction project, the environmental protection acceptance of Newsun Technology Co., Ltd. with an annual output of 300000 sets of communication chassis spray production line project is publicized as follows:
Project Name: annual output of 300000 sets of communication chassis spray production line project
Construction unit: Newsun Technology Co., Ltd
Construction site: 29-31 Laiyan Road, Yuyao City
Construction content: Construction of 300, 000 sets of communication chassis plastic spray production line project. The project has a fixed labor force of 10 people and a single shift system. The annual production days are 300 days
Main environmental protection measures:
(1) Wastewater treatment measures: domestic sewage is discharged into pipes after being pretreated in septic tank and reaching the third level standard of integrated wastewater discharge standard (GB8978-1996).
(2) The main waste gas is plastic dust, solidification waste gas, shot blasting waste gas and natural gas combustion waste gas.
Plastic spraying dust: pulse filter type recovery device is set in the plastic spraying room, and the dust is discharged from the air through a 15m high exhaust funnel after collection and treatment.
Solidification waste gas: the waste gas from plastic powder drying is relatively small, and is discharged from the air through a 15m high exhaust funnel after collection.
Shot blasting waste gas: the shot blasting waste gas is discharged into the air through a 15m high exhaust funnel after passing through the bag dust removal device.
Waste gas from natural gas combustion: the waste gas from natural gas combustion is collected and discharged into the air through a 15m high exhaust funnel.
(3) Noise prevention and control measures: the noise source of the project is mainly the noise of workshop equipment. For all kinds of noise, the enterprise has taken sound insulation and noise reduction measures.
(4) Solid waste treatment measures: the general solid waste generated by the project is mainly domestic garbage and dust generated by bag dust removal. The dust generated by bag dust removal is collected for comprehensive utilization through takeout, and the domestic garbage is collected by covering the dustbin and then transported and disposed by the environmental sanitation department.
Publicity period: June 30, 2020 to July 27, 2020 (20 working days)
Public access www.newsun-tech.com Query the acceptance investigation report and acceptance opinions of the project. If the public has any opinions and suggestions on the construction project, they can report to the construction unit within the period of publicity. Please leave the contact information (name, address, telephone number or email address) for timely reply and feedback.
Name of construction unit: Newsun Technology Co., Ltd
June 30, 2020
宁波普灵通信科技有限公司
年产30万套通讯机箱喷塑生产线项目
竣工环境保护验收公示
根据建设项目竣工环保验收程序的有关规定，现将宁波普灵通信科技有限公司年产30万套通讯机箱喷塑生产线项目竣工环境保护验收情况公示如下：
项目名称：年产30万套通讯机箱喷塑生产线项目
建设单位：宁波普灵通信科技有限公司
建设地点：余姚市来雁路29-31号
建设内容：建设年产30万套通讯机箱喷塑生产线项目。本项目劳动定员10人，单班制，全年生产天数为300天
主要环保措施：
（1）废水治理措施：生活污水经化粪池预处理达《污水综合排放标准》（GB8978-1996）三级标准后纳管排放。
（2）废气主要为喷塑粉尘、固化废气、抛丸废气及天然气燃烧废气。
喷塑粉尘：喷塑房内设脉冲滤芯式回收装置，粉尘经收集处理后通过15m高的排气筒高空排放。
固化废气：塑粉烘干废气产生量较小，经收集后通过15m高的排气筒高空排放。
抛丸废气：抛丸废气通过设备自带的布袋除尘装置后通过15m高的排气筒高空排放。
天然气燃烧废气：天然气燃烧废气经收集后，经收集后通过15m高的排气筒高空排放。
（3）噪声防治措施：本项目噪声源主要是车间设备噪声，针对各类噪声，企业已采取了隔声降噪等措施。
（4）固体废物治理措施：本项目产生的一般固体废弃物主要是生活垃圾以及布袋除尘产生的粉尘。布袋除尘产生的粉尘进行收集通过外卖综合利用，生活垃圾通过加盖垃圾箱收集后委托环卫部门清运处理。
公示期限：2020年6月30日~2020年7月27日（20个工作日）
公众可登录www.newsun-tech.com查询该项目验收调查报告和验收意见。公众对该建设项目如有意见和建议可于公示期限内向建设单位反映，反映问题请留下联系方式（姓名、地址、电话或邮箱），以便得到及时答复反馈。
建设单位名称：宁波普灵通信科技有限公司
联系人：黄总
电话：13777151630
宁波普灵通信科技有限公司
2020年6月30日
